Sepax SEC Product Family Comparison Chart

Product Line SRT® Zenix™ SRT®-C Zenix™-C
Particle size 5 µm 3 µm 5 µm 3 µm
Pore size (Å) 100, 150, 300, 500, 1000 & 2000 100, 150, 300 100, 150, 300, 500, 1000 & 2000 100, 150, 300
Resolution High Highest, Short column for faster separation High Highest, Short column for faster separation
Efficiency High Doubled from 5µm High Doubled from 5µm
Selectivity Same for SRT® and Zenix™ Same for SRT®-C and Zenix™-C
Surface structure Chemically bonded stand-up monolayer Chemically bonded lay-down monolayer
Recommended Sample Types Monoclonal antibodies, proteins, peptides, nucleic acids, oligonucleotides, virus, and water-soluble polymers “Tough samples” such as hydrophobic proteins like insulin, membrane protein monoclonal antibodies derivatized with polymer branches, e.g. polypeptide, PEG.

Utilizing proprietary surface technologies, SRT SEC phases are made of the uniform, hydrophilic, and neutral nanometer thick films chemically bonded on the high purity and enhanced mechanical stability silica. This proprietary surface technology results in excellent column-to-column reproducibility. The nature of the chemical bonding and the maximum bonding density of the thin film benefit SRT SEC phases with high stability and negligible non-specific interactions. Along with the widest pore size selection of 100, 150, 300, 500, 1000 and 2000Å, SRT SEC packings have highest capacity that enables highest resolution.

Silica: Spherical, high purity (<10 ppm metals)
Pore size: 100, 150, 300, 500, 1000 and 2000 Å
Particle size: 5 µm
Phase structure: chemically bonded and hydrophilic

 

Sepax SRT SEC-100

Standard Dimension:

Part Number Particle Size Pore Size ID×Length
215100-4605 [1] 5 µm 100 Å 4.6×50mm
215100P-4605 [1] [3] 5 µm 100 Å 4.6×50mm
215100-4615 5 µm 100 Å 4.6×150mm
215100-4630 5 µm 100 Å 4.6×300mm
215100P-4630 [3] 5 µm 100 Å 4.6×300mm
215100-7805 [1] 5 µm 100 Å 7.8×50mm
215100-7815 5 µm 100 Å 7.8×150mm
215100-7830 5 µm 100 Å 7.8×300mm
215100-10005 [1] 5 µm 100 Å 10.0×50mm
215100-10015 5 µm 100 Å 10.0×150mm
215100-10030 5 µm 100 Å 10.0×300mm
215100-21205 [1] 5 µm 100 Å 21.2×50mm
215100-21230 5 µm 100 Å 21.2×300mm

 


Sepax SRT SEC-150

Standard Dimension:

Part Number Particle Size Pore Size ID×Length
215150-4605 [1] 5 µm 150 Å 4.6×50mm
215150P-4605 [1] [3] 5 µm 150 Å 4.6×50mm
215150-4615 5 µm 150 Å 4.6×150mm
215150-4630 5 µm 150 Å 4.6×300mm
215150P-4630 [3] 5 µm 150 Å 4.6×300mm
215150-7805 [1] 5 µm 150 Å 7.8×50mm
215150-7815 5 µm 150 Å 7.8×150mm
215150-7830 5 µm 150 Å 7.8×300mm
215150-10005 [1] 5 µm 150 Å 10.0×50mm
215150-10015 5 µm 150 Å 10.0×150mm
215150-10030 5 µm 150 Å 10.0×300mm
215150-21205 [1] 5 µm 150 Å 21.2×50mm
215150-21230 5 µm 150 Å 21.2×300mm

Sepax SRT SEC-300

Standard Dimension:

Part Number Particle Size Pore Size ID×Length
215300-4605 [1] 5 µm 300 Å 4.6×50mm
215300P-4605 [1] [3] 5 µm 300 Å 4.6×50mm
215300-4615 5 µm 300 Å 4.6×150mm
215300-4630 5 µm 300 Å 4.6×300mm
215300P-4630 [3] 5 µm 300 Å 4.6×300mm
215300-7805 [1] 5 µm 300 Å 7.8×50mm
215300-7815 5 µm 300 Å 7.8×150mm
215300-7830 5 µm 300 Å 7.8×300mm
215300-10005 [1] 5 µm 300 Å 10.0×50mm
215300-10015 5 µm 300 Å 10.0×150mm
215300-10030 5 µm 300 Å 10.0×300mm
215300-21205 [1] 5 µm 300 Å 21.2×50mm
215300-21230 5 µm 300 Å 21.2×300mm
215300-30030 5 µm 300 Å 30.0×300mm

Sepax SRT SEC-500

Standard Dimension:

Part Number Particle Size Pore Size ID×Length
215500-4605 [1] 5 µm 500 Å 4.6×50mm
215500P-4605 [1] [3] 5 µm 500 Å 4.6×50mm
215500-4615 5 µm 500 Å 4.6×150mm
215500-4630 5 µm 500 Å 4.6×300mm
215500P-4630 [3] 5 µm 500 Å 4.6×300mm
215500-7805 [1] 5 µm 500 Å 7.8×50mm
215500-7815 5 µm 500 Å 7.8×150mm
215500-7830 5 µm 500 Å 7.8×300mm
215500-10005 [1] 5 µm 500 Å 10.0×50mm
215500-10015 5 µm 500 Å 10.0×150mm
215500-10030 5 µm 500 Å 10.0×300mm
215500-21205 [1] 5 µm 500 Å 21.2×50mm
215500-21230 5 µm 500 Å 21.2×300mm

Sepax SRT SEC-1000

Standard Dimension:

Part Number Particle Size Pore Size ID×Length
215950-4605 [1] 5 µm 1000 Å 4.6×50mm
215950P-4605 [1] [3] 5 µm 1000 Å 4.6×50mm
215950-4615 5 µm 1000 Å 4.6×150mm
215950-4630 5 µm 1000 Å 4.6×300mm
215950P-4630 [3] 5 µm 1000 Å 4.6×300mm
215950-7805 [1] 5 µm 1000 Å 7.8×50mm
215950-7815 5 µm 1000 Å 7.8×150mm
215950-7830 5 µm 1000 Å 7.8×300mm
215950-10005 [1] 5 µm 1000 Å 10.0×50mm
215950-10015 5 µm 1000 Å 10.0×150mm
215950-10030 5 µm 1000 Å 10.0×300mm
215950-21205 [1] 5 µm 1000 Å 21.2×50mm
215950-21230 5 µm 1000 Å 21.2×300mm

Sepax SRT SEC-2000

Standard Dimension:

Part Number Particle Size Pore Size ID×Length
215980-4605 [1] 5 µm 2000 Å 4.6×50mm
215980P-4605 [1] [3] 5 µm 2000 Å 4.6×50mm
215980-4615 5 µm 2000 Å 4.6×150mm
215980-4630 5 µm 2000 Å 4.6×300mm
215980P-4630 [3] 5 µm 2000 Å 4.6×300mm
215980-7805 [1] 5 µm 2000 Å 7.8×50mm
215980-7815 5 µm 2000 Å 7.8×150mm
215980-7830 5 µm 2000 Å 7.8×300mm
215980-10005 [1] 5 µm 2000 Å 10.0×50mm
215980-10015 5 µm 2000 Å 10.0×150mm
215980-10030 5 µm 2000 Å 10.0×300mm
215980-21205 [1] 5 µm 2000 Å 21.2×50mm
215980-21230 5 µm 2000 Å 21.2×300mm

[1] Guard column.

[3] Column packed with PEEK tubing.

Coupler
P/N: 102002-COUPLER
One-piece PEEK coupler, recommended to connect columns in series.

Made of 3 µm silica particles, Zenix SEC packing is a breakthrough technology for size exclusion chromatography. Combination of 3 µm silica particle size and proprietary surface technology enables highest separation efficiency and resolution for biological molecules and water soluble polymers. Available pore sizes of Zenix packings are 100, 150 and 300Å.

Zenix SEC Technical Specifications

Phase Zenix SEC-80 Zenix SEC-100 Zenix SEC-150 Zenix SEC-300
Material Neutral, hydrophilic film bonded silica
Particle size 3 µm
Pore size ~ 80 Å ~ 100 Å ~ 150 Å ~ 300 Å
Protein MW range (native) 100 – 50,000 100 – 100,000 500 – 150,000 5,000 – 1,250,000
pH stability 2 – 8.5 (pH 8.5-9.5 can be tolerated temporarily.)
Backpressure (psi for a 7.8×300 mm) ~ 1,500 ~ 1,500 ~ 1,500 ~ 1,500
Maximum backpressure (psi) ~ 4,500 ~ 4,500 ~ 4,500 ~ 3,500
Salt concentration range 20 mM – 2.0 M
Maximum temperature (°C) ~ 80
Mobile phase compatibility Aqueous and organic

 

Sepax Zenix SEC-80

Standard Dimension:

Part Number Particle Size Pore Size ID×Length
213080-4605 [1] 3 µm 80 Å 4.6×50mm
213080-4615 3 µm 80 Å 4.6×150mm
213080-4630 3 µm 80 Å 4.6×300mm
213080-7805 [1] 3 µm 80 Å 7.8×50mm
213080-7815 3 µm 80 Å 7.8×150mm
213080-7820 3 µm 80 Å 7.8×200mm
213080-7830 3 µm 80 Å 7.8×300mm

Custom Dimension:

Part Number Particle Size Pore Size ID×Length
213080-2105 [1] 3 µm 80 Å 2.1×50mm
213080-2130 3 µm 80 Å 2.1×300mm
213080P-4605 [1][3] 3 µm 80 Å 4.6×50mm
213080P-4630 [3] 3 µm 80 Å 4.6×300mm
213080-10005 [1] 3 µm 80 Å 10.0×50mm
213080-10015 3 µm 80 Å 10.0×150mm
213080-10030 3 µm 80 Å 10.0×300mm
213080-21205 [1] 3 µm 80 Å 21.2×50mm
213080-21230 3 µm 80 Å 21.2×300mm

Additional dimension upon request.
[1] Guard column.

[3] Column packed with PEEK tubing.

Coupler
P/N: 102002-COUPLER
One-piece PEEK coupler, recommended to connect columns in series.

SEC Screening Kit:
P/N Phase ID × Length Pore Size
SECKIT-7830 Zenix 7.8 × 300 mm 300 Å
Zenix-C 7.8 × 300 mm 300 Å
SECKIT-4630 Zenix 4.6 × 300 mm 300 Å
Zenix-C 4.6 × 300 mm 300 Å

 Zenix SEC-100

Standard Dimension:

Part Number Particle Size Pore Size ID×Length
213100-4605 [1] 3 µm 100 Å 4.6×50mm
213100P-4605 [1] [3] 3 µm 100 Å 4.6×50mm
213100-4615 3 µm 100 Å 4.6×150mm
213100-4630 3 µm 100 Å 4.6×300mm
213100P-4630 [3] 3 µm 100 Å 4.6×300mm
213100-7805 [1] 3 µm 100 Å 7.8×50mm
213100-7815 3 µm 100 Å 7.8×150mm
213100-7820 3 µm 100 Å 7.8×200mm
213100-7830 3 µm 100 Å 7.8×300mm
213100-10005 [1] 3 µm 100 Å 10.0×50mm
213100-10015 3 µm 100 Å 10.0×150mm
213100-10030 3 µm 100 Å 10.0×300mm
213100-21205 [1] 3 µm 100 Å 21.2×50mm
213100-21230 3 µm 100 Å 21.2×300mm

Custom Dimension:

Part Number Particle Size Pore Size ID×Length
213100-2105 [1] 3 µm 100 Å 2.1×50mm
213100-2130 3 µm 100 Å 2.1×300mm

Additional dimension upon request.
[1] Guard column.

[3] Column packed with PEEK tubing.

Coupler
P/N: 102002-COUPLER
One-piece PEEK coupler, recommended to connect columns in series.

SEC Screening Kit:
P/N Phase ID × Length Pore Size
SECKIT-7830 Zenix 7.8 × 300 mm 300 Å
Zenix-C 7.8 × 300 mm 300 Å
SECKIT-4630 Zenix 4.6 × 300 mm 300 Å
Zenix-C 4.6 × 300 mm 300 Å

Sepax Zenix SEC-150

Standard Dimension:

Part Number Particle Size Pore Size ID×Length
213150-4605 [1] 3 µm 150 Å 4.6×50mm
213150P-4605 [1] [3] 3 µm 150 Å 4.6×50mm
213150-4615 3 µm 150 Å 4.6×150mm
213150-4630 3 µm 150 Å 4.6×300mm
213150P-4630 [3] 3 µm 150 Å 4.6×300mm
213150-7805 [1] 3 µm 150 Å 7.8×50mm
213150-7815 3 µm 150 Å 7.8×150mm
213150-7820 3 µm 150 Å 7.8×200mm
213150-7830 3 µm 150 Å 7.8×300mm
213150-10005 [1] 3 µm 150 Å 10.0×50mm
213150-10015 3 µm 150 Å 10.0×150mm
213150-10030 3 µm 150 Å 10.0×300mm
213150-21205 [1] 3 µm 150 Å 21.2×50mm
213150-21230 3 µm 150 Å 21.2×300mm

Custom Dimension:

Part Number Particle Size Pore Size ID×Length
213150-2105 [1] 3 µm 150 Å 2.1×50mm
213150-2130 3 µm 150 Å 2.1×300mm

Additional dimension upon request.
[1] Guard column.

[3] Column packed with PEEK tubing.

Coupler
P/N: 102002-COUPLER
One-piece PEEK coupler, recommended to connect columns in series.

SEC Screening Kit:
P/N Phase ID × Length Pore Size
SECKIT-7830 Zenix 7.8 × 300 mm 300 Å
Zenix-C 7.8 × 300 mm 300 Å
SECKIT-4630 Zenix 4.6 × 300 mm 300 Å
Zenix-C 4.6 × 300 mm 300 Å

SRT®-C SEC phase, developed based on innovative surface coating technology, comprises of uniform, hydrophilic, and neutral nanometer thick film chemically bonded to high purity and mechanically stabilized silica. SRT®-C, uses lay-down monolayer on porous silica as oppose to SRT of stand-up monolayer (as shown below), offers ideal phase chemistry for hydrophobic samples like insulin, membrane protein monoclonal antibodies derivatized with polymer branches (polypeptide or PEG) separation.

Stationary Phase Structure Illustration and Comparison

Phase structure difference: a monolayer stands up on the silica surface for SRT® and Zenix™, and a monolayer lays down on the silica surface for SRT®-C and Zenix™-C.

SRT®-C Technical Specifications

Phase SRT®-C SEC-150 SRT®-C SEC-300 SRT®-C SEC-500
Material Neutral, hydrophilic film bonded silica
Particle size 5 µm
Pore size ~ 150 Å ~ 300 Å ~ 500 Å
Protein MW range (native) 500 – 150,000 5,000 – 1,250,000 15,000 – 5,000,000
pH stability 2 – 8.5 (pH 8.5-9.5 can be tolerated temporarily.)
Backpressure (for a 7.8×300 mm) ~ 700 psi ~ 700 psi ~ 700 psi
Maximum backpressure ~ 4,500 psi ~ 3,500 psi ~ 3,000 psi
Salt concentration range 20 mM – 2.0 M
Maximum temperature ~ 80 °C
Mobile phase compatibility Aqueous and organic

 

Sepax SRT-C SEC-100

 

Standard Dimension:

Part Number Particle Size Pore Size ID×Length
235100-4605 5 µm 100 Å 4.6×50mm
235100P-4605 [3] 5 µm 100 Å 4.6×50mm
235100-4615 5 µm 100 Å 4.6×150mm
235100-4630 5 µm 100 Å 4.6×300mm
235100P-4630 [3] 5 µm 100 Å 4.6×300mm
235100-7805 5 µm 100 Å 7.8×50mm
235100-7815 5 µm 100 Å 7.8×150mm
235100-7830 5 µm 100 Å 7.8×300mm
235100-10005 5 µm 100 Å 10.0×50mm
235100-10015 5 µm 100 Å 10.0×150mm
235100-10030 5 µm 100 Å 10.0×300mm
235100-21205 5 µm 100 Å 21.2×50mm
235100-21230 5 µm 100 Å 21.2×300mm

Sepax SRT-C SEC-150

Standard Dimension:

Part Number Particle Size Pore Size ID×Length
235150-4605 5 µm 150 Å 4.6×50mm
235150P-4605 [3] 5 µm 150 Å 4.6×50mm
235150-4630 5 µm 150 Å 4.6×300mm
235150P-4630 [3] 5 µm 150 Å 4.6×300mm
235150-7805 5 µm 150 Å 7.8×50mm
235150-7815 5 µm 150 Å 7.8×150mm
235150-7830 5 µm 150 Å 7.8×300mm
235150-10005 5 µm 150 Å 10.0×50mm
235150-10015 5 µm 150 Å 10.0×150mm
235150-10030 5 µm 150 Å 10.0×300mm
235150-21205 5 µm 150 Å 21.2×50mm
235150-21230 5 µm 150 Å 21.2×300mm

Sepax SRT-C SEC-300

Standard Dimension:

Part Number Particle Size Pore Size ID×Length
235300-4605 5 µm 300 Å 4.6×50mm
235300P-4605 [3] 5 µm 300 Å 4.6×50mm
235300-4615 5 µm 300 Å 4.6×150mm
235300-4630 5 µm 300 Å 4.6×300mm
235300P-4630 [3] 5 µm 300 Å 4.6×300mm
235300-7805 5 µm 300 Å 7.8×50mm
235300-7815 5 µm 300 Å 7.8×150mm
235300-7830 5 µm 300 Å 7.8×300mm
235300-10005 5 µm 300 Å 10.0×50mm
235300-10015 5 µm 300 Å 10.0×150mm
235300-10030 5 µm 300 Å 10.0×300mm
235300-21205 5 µm 300 Å 21.2×50mm
235300-21230 5 µm 300 Å 21.2×300mm

Sepax SRT-C SEC-500

Standard Dimension:

Part Number Particle Size Pore Size ID×Length
235500-4605 5 µm 500 Å 4.6×50mm
235500P-4605 [3] 5 µm 500 Å 4.6×50mm
235500-4615 5 µm 500 Å 4.6×150mm
235500-4630 5 µm 500 Å 4.6×300mm
235500P-4630 [3] 5 µm 500 Å 4.6×300mm
235500-7805 5 µm 500 Å 7.8×50mm
235500-7815 5 µm 500 Å 7.8×150mm
235500-7830 5 µm 500 Å 7.8×300mm
235500-10005 5 µm 500 Å 10.0×50mm
235500-10015 5 µm 500 Å 10.0×150mm
235500-10030 5 µm 500 Å 10.0×300mm
235500-21205 5 µm 500 Å 21.2×50mm
235500-21230 5 µm 500 Å 21.2×300mm

Sepax SRT-C SEC-1000

Standard Dimension:

Part Number Particle Size Pore Size ID×Length
235950-4605 5 µm 1000 Å 4.6×50mm
235950P-4605 [3] 5 µm 1000 Å 4.6×50mm
235950-4615 5 µm 1000 Å 4.6×150mm
235950-4630 5 µm 1000 Å 4.6×300mm
235950P-4630 [3] 5 µm 1000 Å 4.6×300mm
235950-7805 5 µm 1000 Å 7.8×50mm
235950-7815 5 µm 1000 Å 7.8×150mm
235950-7830 5 µm 1000 Å 7.8×300mm
235950-10005 5 µm 1000 Å 10.0×50mm
235950-10015 5 µm 1000 Å 10.0×150mm
235950-10030 5 µm 1000 Å 10.0×300mm
235950-21205 5 µm 1000 Å 21.2×50mm
235950-21230 5 µm 1000 Å 21.2×300mm

Sepax SRT-C SEC-2000

Standard Dimension:

Part Number Particle Size Pore Size ID×Length
235980-4605 5 µm 2000 Å 4.6×50mm
235980P-4605 [3] 5 µm 2000 Å 4.6×50mm
235980-4615 5 µm 2000 Å 4.6×150mm
235980-4630 5 µm 2000 Å 4.6×300mm
235980P-4630 [3] 5 µm 2000 Å 4.6×300mm
235980-7805 5 µm 2000 Å 7.8×50mm
235980-7815 5 µm 2000 Å 7.8×150mm
235980-7830 5 µm 2000 Å 7.8×300mm
235980-10005 5 µm 2000 Å 10.0×50mm
235980-10015 5 µm 2000 Å 10.0×150mm
235980-10030 5 µm 2000 Å 10.0×300mm
235980-21205 5 µm 2000 Å 21.2×50mm
235980-21230 5 µm 2000 Å 21.2×300mm

[3] Column packed with PEEK tubing.

Coupler
P/N: 102002-COUPLER
One-piece PEEK coupler, recommended to connect columns in series.

Zenix™-C SEC phase, developed based on innovative surface coating technology, comprises of uniform, hydrophilic, and neutral nanometer thick film chemically bonded to high purity and mechanically stabilized silica. Zenix™-C, uses lay-down monolayer on porous silica as oppose to Zenix of stand-up monolayer (as shown below), offers ideal phase chemistry for hydrophobic samples like insulin, membrane protein monoclonal antibodies derivatized with polymer branches (polypeptide or PEG) separation. The 3µm based packing material allows for high resolution and performance separation.

Stationary Phase Structure Illustration and Comparison

Phase structure difference: a monolayer stands up on the silica surface for SRT® and Zenix™, and a monolayer lays down on the silica surface for SRT®-C and Zenix™-C.

Zenix-C Technical Specifications

Phase Zenix-C SEC-100 Zenix-C SEC-150 Zenix-C SEC-300
Material Neutral, hydrophilic film bonded silica
Particle size 3 µm
Pore size ~ 100 Å ~ 150 Å ~ 300 Å
Protein MW range (native) 100 – 100,000 500 – 150,000 5,000 – 1,250,000
pH stability 2 – 8.5 (pH 8.5-9.5 can be tolerated temporarily.)
Backpressure (for a 7.8×300 mm) ~ 1,500 psi ~ 1,375 psi ~ 1,100 psi
Backpressure (for a 4.6×300 mm) ~ 1,400 psi ~ 1,250 psi ~ 1,000 psi
Maximum backpressure ~ 4,500 psi ~ 4,500 psi ~ 3,500 psi
Salt concentration range 20 mM – 2.0 M
Maximum temperature ~ 80 °C
Mobile phase compatibility Aqueous and organic
Sepax Zenix-C SEC-80

Standard Dimension:

Part Number Particle Size Pore Size ID×Length
233080-4605 3 µm 80 Å 4.6×50mm
233080-4630 3 µm 80 Å 4.6×300mm
233080-7805 3 µm 80 Å 7.8×50mm
233080-7830 3 µm 80 Å 7.8×300mm

Sepax Zenix-C SEC-100

Standard Dimension:

Part Number Particle Size Pore Size ID×Length
233100-4605 3 µm 100 Å 4.6×50mm
233100P-4605 [3] 3 µm 100 Å 4.6×50mm
233100-4615 3 µm 100 Å 4.6×150mm
233100-4630 3 µm 100 Å 4.6×300mm
233100P-4630 [3] 3 µm 100 Å 4.6×300mm
233100-7805 3 µm 100 Å 7.8×50mm
233100-7815 3 µm 100 Å 7.8×150mm
233100-7830 3 µm 100 Å 7.8×300mm
233100-10005 3 µm 100 Å 10.0×50mm
233100-10015 3 µm 100 Å 10.0×150mm
233100-10030 3 µm 100 Å 10.0×300mm
233100-21205 3 µm 100 Å 21.2×50mm
233100-21230 3 µm 100 Å 21.2×300mm

Sepax Zenix-C SEC-150

Standard Dimension:

Part Number Particle Size Pore Size ID×Length
233150-4605 3 µm 150 Å 4.6×50mm
233150P-4605 [3] 3 µm 150 Å 4.6×50mm
233150-4615 3 µm 150 Å 4.6×150mm
233150-4630 3 µm 150 Å 4.6×300mm
233150P-4630 [3] 3 µm 150 Å 4.6×300mm
233150-7805 3 µm 150 Å 7.8×50mm
233150-7815 3 µm 150 Å 7.8×150mm
233150-7830 3 µm 150 Å 7.8×300mm
233150-10005 3 µm 150 Å 10.0×50mm
233150-10015 3 µm 150 Å 10.0×150mm
233150-10030 3 µm 150 Å 10.0×300mm
233150-21205 3 µm 150 Å 21.2×50mm
233150-21230 3 µm 150 Å 21.2×300mm

Sepax Zenix-C SEC-300

Standard Dimension:

Part Number Particle Size Pore Size ID×Length
233300-4605 3 µm 300 Å 4.6×50mm
233300P-4605 [3] 3 µm 300 Å 4.6×50mm
233300-4615 3 µm 300 Å 4.6×150mm
233300-4630 3 µm 300 Å 4.6×300mm
233300P-4630 [3] 3 µm 300 Å 4.6×300mm
233300-7805 3 µm 300 Å 7.8×50mm
233300-7815 3 µm 300 Å 7.8×150mm
233300-7820 3 µm 300 Å 7.8×200mm
233300-7830 3 µm 300 Å 7.8×300mm
233300-10005 3 µm 300 Å 10.0×50mm
233300-10015 3 µm 300 Å 10.0×150mm
233300-10030 3 µm 300 Å 10.0×300mm
233300-21205 3 µm 300 Å 21.2×50mm
233300-21230 3 µm 300 Å 21.2×300mm

[3] Column packed with PEEK tubing.

Coupler
P/N: 102002-COUPLER
One-piece PEEK coupler, recommended to connect columns in series.

SEC Screening Kit:
P/N Phase ID × Length Pore Size
SECKIT-7830 Zenix 7.8 × 300 mm 300 Å
Zenix-C 7.8 × 300 mm 300 Å
SECKIT-4630 Zenix 4.6 × 300 mm 300 Å
Zenix-C 4.6 × 300 mm 300 Å

Need help? Email Us Here! Chat With Us Now!

← Prev Step

Thanks for contacting us. We'll get back to you as soon as we can.

Please provide a valid name, email, and question.

Powered by LivelyChat
Powered by LivelyChat Delete History